Other News
|
| Archives |
|
| Links |
|
|
|
|
|
|
Friday, July 07, 2006 |
|
Proper Printer Storage
|
"I have three epson inkjets: SP870, SP1270, and SP890. I only keep one running at a time to avoid ink drying out problems, etc. What is the best way to store the other two? Should the cartridges be left in them so that everything drys out together, or would it be better to remove the cartridges and flush out the heads with cleaning solution (yours, of course) and then storage without cartridges. Or does it matter? So far I've had good results with your cleaning solution. Thanks" - David Head
Epson printers should ALWAYS be stored with the ink tanks in place, whether they are empty or not. Removing the cartridges exposes the ink feed tubes directly to the drying effects of air.
For long term storage I recommend flushing the heads with cleaning solution and reinsert the cartridges. Also, soak the waste ink pads. Replug the printer, turn it on and wait for the heads to park on the right side. Turn the printer off via it's on/off switch -- this fully activates the printhead capping mechanism and brings the "soaked" pads up nice and snug against the bottom of the printhead.
HP, Lexmark and Dell Printer Storage:
These printer cartridges have the printhead built into them. Remove the cartridge and place them in a zip-lock type plastic bag along with a slighly moistened paper towel or napkin. Seal tightly. This will help keep the ink nozzles from drying out.
Canon Printer Storage:
Leave the ink tanks in the printer. Turn the printer off via it's on/off switch so the printhead will park and seal properly.
* Always cover the stored printer to prevent dust and other debris from entering the printer.
source: http://www.maxpatchink.com |
posted by ^%&^
@ 8:20 AM
 |
Permalink
|
|
|
|
|
|
|
|
